ProntoFix to provide you with fully transparent, and has low shrinkage rate and good robustness of fast curing system.Effect how?
Improve the quality of the work flow and speed.Now you can finish the sample on the same day of the Mosaic, preparation and analysis.
ProntoFix - cold embedded system, the advantages of high performance epoxy resin including low shrinkage rate, excellent robustness and transparent.Many need 8 to 12 hours to curing epoxy resin system, unless they curing in the oven.ProntoFix not only has the same advantage, and with rapid curing system.
ProntoFix can be at the peak, about 140 ° C temperature curing within 90 minutes *.This means that the sample set, preparation and analysis can be done in a day.
Overview of all Struers epoxy resin, pleaseClick here for a.
ProntoFix system designed to meet the electronic parts, plasma coating, and other fine specimen of high demand and development.
The system is made up of resin and hardener.Using a small Mosaic cup size and in the environment of low temperature and can be used in combination with accelerator and to ensure rapid solidification.If need to know the recommended accelerator, please see ourguide.Buy ProntoFix suit, Struers system guide is to own, to facilitate your work in the laboratory to understand whether some accelerator is the recommended products.
From a low shrinkage rate to excellent impregnation performance, ProntoFix offers many advantages.Download ProntoFix inlay and troubleshooting guide here, know about using ProntoFix need to know everything.
In addition, if you needmicroelectronicsandThermal spray coatingApplication instructions, please click on the corresponding link.To view a Struers Mosaic products and accessories full range of cold,Please click here.
* concrete curing time and the sample - volume ratio and cup size and environment temperature.
Provide sample visibility, can be more accurately preparation goal
Let you can finish sample in a day of Mosaic, preparation and analysis, for you to save time and improve efficiency
Through convenient and clean inserts to avoid pollution risk.By avoiding the chamfering edge detection
Provide enhanced edge protection convenient sample detection
By brittle fill holes and seal components to ensure correctly evaluate coating properties.It has shown in the image above (used in ProntoFix EpoDye inlaid plasma spraying layer).
Ensure that components are easy to mix.The fluid characteristics can improve robustness
Like many other Struers epoxy resin, ProntoFix can be usedVacuum impregnation
When mixed EpoDye fluorescent dye, can easily identify fill all the holes under fluorescent light
Buy ProntoFix suitAnd get the guide system
