Grinding and polishing accessories

Grinding and polishing accessories

Use the appropriate accessories let you every time can get the best effect of grinding and polishing and reliable and efficient results.

Struers offers all kinds of the sample holder and can be used for holding three or more sample or not with the sample.Can holding all kinds of the shape of the sample.If you want to a single sample preparation, have a variety of mobile plate sample is available.

Can be found in our plan, use a double clamping principle design of lightweight aluminum sample holder.A screw fixed two samples.This feature can achieve clamping speed faster, in most cases also can improve the performance of the sample holder.

Leveling equipment can leveling for 140, 160 and 200 mm in diameter of the sample holder sample, there are various types of store content ark, so simple stored safely grinding disc and polishing cloth

The sample holder

The sample holder

The sample holder using a variety of shapes and sizes is not set sample or sample with sample.

  • The sample holder for 140, 160 and 200 mm in diameter.
  • Stainless steel or lightweight aluminum sample holder.
  • A double clamping to improve performance.
  • As well as holding up to 12 samples.
  • Can adjust the hole diameter, and more flexibility.
  • Through a simple, fast clamping to save valuable time.

Sample mobile disk

Sample mobile disk

If you want to a single sample preparation, have a variety of mobile plate sample is available.

  • Made of stainless steel
  • Suitable for 3-6 samples
  • Suitable for nonporous Accustop

MD - Disc with inner ring

MD - Disc with inner ring

Preparation of magnetic plate with inner ring.

  • There are 200, 250, 300 mm diameter.
  • Through the inner ring can easily replace MD - Disc

AccuStop

AccuStop

Used for manual grinding on SiC grinding paper single metallographic specimen of the sample holder.

AccuStop has two dimensions: AccuStop 40 can handle 40 mm diameter of the sample, and can process 30 mm diameter AccuStop 30 samples.

In the standard case, AccuStop can be used for the two cylindrical samples, through Flangeform install the flange sample to achieve rapid fixed rubber ring.

Accustop T

AccuStop -t

AccuStop -t is specially designed for the microelectronics industry target preparation.

AccuStop -t unique tilt function can reach target multiple point in the plane of the sample at the same time, such as multi-line solder ball and PCB hole.

AccuStop -t sample holder may tilt in any direction will be the sample + / - 2 degrees.

Accumeter

AccuMeter

AccuMeter measuring station is specially designed for used with AccuStop - T.

  • Can easily measure the tilt Angle, at the same time equipped with a range of 0 to 25 mm, step length of 10 micron micrometer.
  • Extremely effective when used in conjunction with AccuStop 30.

insert

TargetSystem - inserts

Used with ø 40 mm set sample cup of inserts, 50 pieces
The largest sample size 35 x 20 mm.

TargetSystem parallel sample holder

TargetSystem - parallel sample holder

Used for parallel polishing adapter (reusable).
The largest sample size 23 23 mm x.

TargetSystem sample holder

TargetSystem - samples

Is suitable for the cross section of the adapter (at once).
The largest sample size 27 x 20.5 mm.50.

TargetGrip

TargetSystem - Target Grip

TargetGrip is tilting specimen holder.It can accommodate the installation of a diameter of 40 mm samples.For large sample adapter, cross section and parallel polishing and 40 mm to 25 mm is the adapter, can be used as a base of SEM.

UniForce

Grinding and polishing materials