Secotom
- Cutting capacity of 50 x 165 mm.
- Automatic precision cutting machine
- Cutting wheel size 75-203 mm / 3-8 "in diameter
- Intuitive user interface make the operation easy
- Acme flexible T slot cutting machine to realize precision cutting
- X axis movement to realize continuous cutting automatically
- The laser to ensure accurate positioning
The first came out in 2001 and immediately Secotom precision cutting machine for success.Since then, thousands of Secotom leave our factory, laboratory services all over the world.Intuitive user interface means that almost without any training.Optional automatic X mobile replaced time-consuming, mobile T slot cutting machine can be used to cutting of various sizes and shapes.Secotom has many additional features, such as laser, for hard material feed ExciCut model and intelligent control.
Using the intuitive user interface easily set, almost without any training
Simple user interface and color display screen make the operation become very simple.There are no complicated menus.Using the multi-function knob set parameters, through the joystick quickly locate workpiece, and automatically adjust the height of the cutting wheel.Yes, that's it.Artifacts of relocation was replaced by the automatic X axis movement
Thanks to the optional X axis move, do not need to waste time to redefine the workpiece can perform a series of cutting.Cutting machine can move 40 mm, user can choose up to four different thickness of the slider.With the aid of laser positioning, first try to reach place
Positioning can be very time consuming, but Secotom using laser positioning points out that the cutting position, positioning it easier from now on.Laser combined with a joystick, for easy positioning.With extreme flexible mobile T slot cutting machine, cutting a variety of sizes and shapes
Secotom cutting machine to provide a variety of sizes and shapes of extreme accuracy and flexibility.Can cut big and deep artifacts (up to 70 mm / 2.8 "diameter or size of up to 165 x 50 mm / 6.5" x2 ").Cutting machine is equipped with 8 mm t-slot, user can choose from a variety of fixture is best for their cutting operation and can achieve the highest accuracy of tool.Siemens Industrial Turbomachinery select this combination to achieve the perfect precision cutting
See more advantage in the brochure
Optimal precision cutting of key features:
-
-
Laser cutting position are pointed out
Laser during clamping provides great help, because it points out that the cutting position, so as to realize a rapid positioning.
Laser cutting position are pointed out
-
Intuitive user interface makes operation is very simple
Secotom without programming, there is no I don't know how to operate the risk of complex menus.Equipped with large color display for easy operation.Use the spin/push knob quickly and easily navigation and changing parameters.
Intuitive user interface makes operation is very simple
-
Equipped with a large movable cutting machine to cut big and deep artifacts
Cutting machine size is 258 x 184 mm / 12.2 "x 7.2", very suitable for cutting big and deep artifacts.The large cutting machine is very flexible, became the best clamping option.
Equipped with a large movable cutting machine to cut big and deep artifacts
-
X axis automatically move without repositioning for continuous cutting
Optional X cutting machine without repositioning for continuous cutting, to quickly complete the cutting sequence.
X axis automatically move without repositioning for continuous cutting
-
Cutting wheel height adjustment
Secotom cutting wheel can be in the range of 40 mm (1.6 ") adjust the height, so that they can use a variety of fixture and holder, wedge tenon sample clamp and adaptation.In addition, it can use a variety of sizes of cutting wheel, so easy to compensate the cutting wheel wear.
Cutting wheel height adjustment
-
Built-in circulating cooling box has a smaller area
Built-in circulating cooling box has a smaller area and better access.Barrier is set up in the cabinet to collect the most cutting debris, thus reducing the cooling nozzle clogging.
Built-in circulating cooling box has a smaller area
-
Used in hard material ExciCut model to minimize the risk of heat damage
ExciCut used in cutting not directly cutting very hard materials, to minimize the risk of thermal damage.As cutting machine forward, ExciCut can control the cutting wheel to move up and down.This ensures that the small contact area between the cutting wheel and the workpiece, and provide better access to the coolant.
Used in hard material ExciCut model to minimize the risk of heat damage
-
Avoid motor overload OptiFeed intelligent feed control
Cut irregular workpiece can be very difficult, the workpiece or cutting wheel damage risk is high.As the area of contact between workpiece and cutting wheel, power will be to keep the default feed speed increase, and this may result in cutting machine overload.However, thanks to OptiFeed, feed speed automatically at this time is reduced, and the contact area changed hours again, feed speed automatically increases to the preset maximum.
Avoid motor overload OptiFeed intelligent feed control
-
Direct connection to the external exhaust system
Cut some materials may produce harmful and unpleasant smoke.To maintain a healthy environment, Secotom can be directly connected to the external exhaust system, because we generally recommend that from the cutting room to install exhaust system.
Direct connection to the external exhaust system
-
Optional manual ponder
Manual pondereth the diamond and CBN cutting wheel make easier.Reduced gradually along with cutting cutting ability, at the same time cutting wheel rims become shining, the reason is that the surface of the workpiece material deposition to the cutting wheel and abrasive wear.Ponder to restore, and cutting ability can be manually make the device to make the easier.Make the user even when cutting, in order to ensure to get the best effect.
Optional manual ponder
The facts
model
Secotom has three models.
Secotom - 60
Secotom - 60 very suitable for cutting various kinds of need to modify the Settings of the clamping and cutting wheel position of the workpiece.Has many features, including the replaceable t-slot plate of 8.0 mm T slot, touch screen and a joystick and spin/push knob, intelligent control, laser, ten kinds of feed storage method, database and optional automatic cutting machine X.Secotom - 20
Secotom - 20 very suitable for single cutting various need to setup and cutting wheel position of the clamping workpiece small adjustments.Has many features, including the replaceable t-slot plate of 8.0 mm T slot, touch screen and a joystick and transfer/push knob, smart feed control, three methods of storage and laser.Secotom - 6
Secotom - 6 single cutting is very suitable for standard parts, and only a small change between each cutting operation.Has many features, including a 8.0 mm T slot cutting device, touch screen and rotary/push the knob, and a storage method.
Struers equipment in accordance with the provisions of the applicable international order and its subordinate standards.Struers products research and development to upgrade.Therefore, Struers reserves the right to improve product, without prior notice.
Ask for the Secotom technical data sheet
Short and clear instructions, provide summary information, help you choose the best equipment.
• capacity and performance specifications
Size and weight
• electrical data
The noise level,
• security
Get Secotom brochure
Get a complete introduction, descriptive diagrams and key features, help you to choose equipment.
• explanatory diagrams
Key features is introduced
• technical data sheet
Cutting consumables
-
Grinding cutting wheel
Very hard black metal (< 500 HV < 1400).
Enter the online mall Contact the sales -
Grinding cutting wheel
Very hard black metal (< 400 HV < 800).
Enter the online mall Contact the sales -
Grinding cutting wheel
Hard black metal (< 275 HV < 750).
Enter the online mall Contact the sales -
Grinding cutting wheel
Medium hardness of ferrous metals (< 200 HV < 550).
Enter the online mall Contact the sales -
Grinding cutting wheel
Medium softness black metal (< 100 HV < 500).
Enter the online mall Contact the sales -
Grinding cutting wheel
Soft black metal (< 75 HV < 375).
Enter the online mall Contact the sales -
Diamond cutting wheel
Suitable for HV hardness material of 500-2400.
Enter the online mall Contact the sales -
CBN cutting wheel
Suitable for HV hardness material of 500-2400.
Enter the online mall Contact the sales -
Used to cut the additives
Used for circulation, cooling and cleaning.
Enter the online mall Contact the sales -
+
-
-
challenge
Siemens Industrial Turbomachinery company hopes in the preparation of turbine components of material analysis, to further improve the accuracy of precision cutting.Not only do they want faster and more efficient, and hope for the strange shape and small artifacts found more effective clamping solution.
The solution
Siemens Industrial Turbomachinery laboratory for its chose Secotom - 60 precision cutting machine.This not only because of the height of the cutting machine, and because there are strong material like Struers phase knowledge base to provide support for Siemens is very important.
The results of
With Secotom precision cutting machine, the lab for a quick, quiet, easy to operate the cutting experience, super flexible T slot cutting machine, there is no limit to the clamping.
Siemens Industrial Turbomachinery laboratory technician Mikael Berggren
Read the case storyRelated products
Minitom
- Artifact maximum size of 30 x 40 mm
- High precision table cutting machine
- Can prevent the thermal deformation at low speed
A small, low speed, automation precision cutting machine, can not bear the precision of high-speed cutting of high temperature material workpiece in cutting.
Accutom - 10 / - 100
- High precision
- The shorter cut
- Higher production efficiency
Struers production after optimized has been redesigned Accutom cutting machine, high precision and ease of use, for the user to obtain high quality sample provides a good starting point.This cutting machine contains a variety of easy-to-use functions, these functions can provide world-class cutting precision, at the same time, minimize the workload.Accutom - 100 contains many knives...
Discotom - 100 / - 10
- OptiFeed (intelligent feed control)
- AxioWash * (to be automatic cleaning)
- Apply to ExciCut extremely hard materials
Discotom - 10 and Discotom - 100 is a multifunctional table cutting machine, to make you in economic and efficient way to expand...
The correct preparation plan
"More precise structure also need proper application correctly.Different material characteristics need extensive application knowledge.Struers expert is an expert in the optimization of preparation methods, application because the application of knowledge is essential for choosing the correct preparation of solution.Your material - our application solutions."
Birgitte Nielsen
Application specialist, Struers ApS
Meeting with the customer
Don't just listen to us!From using our customer experience in equipment and skills to seek the truth.We asked some loyal customers, to understand their thought of Struers is the most important quality.
We use equipment and consumables for Struers already has nearly 30 years, unparalleled service and application support to our benefit.John Crane, UK Ltd. EnglishBill Taylor,Materials engineers and identification
We have been able to get repetitive, consistency, high quality results.Struers consistency and reliability of the cutting machine for our factory in Indonesia install similar Struers system has a decisive role.Grinding Media, Moly - Cop (Australia)Glenn Sullivan,The technical development manager
Since adopted Struers equipment, human demand, increasing productivity and cost so as to save a lot of production process.Nissan Motor Manufacturing UK Ltd.John SmartProduction supervisor