MD series flat grinding surface

MD grinding surface

Use our unique experience of MD grinding surface, excellent results

Use dedicated to your particular material grinding surface of MD, you can meet the requirements of high preparation at the same time, shorten the preparation time, especially suitable for large capacity automatic device.

  • Used for your materials for optimization of grinding surface, achieving high quality results
  • Reliable process, to ensure the reproducibility
  • Maximize efficiency, reduce waste process

In the online mall to buy

Contact us

Alto

The new MD - Alto, shorten the time needed for your plane lapping up to 30%

The new MD - Alto dedicated to flexible material, can speed up your plane grinding steps, but does not affect the result of high quality.Its consistently high removal rate and longer service life means that you don't have to waste any more time to replace the surface, and allow the operator to make time to do other work.

  • Compared with the method using silicon carbide foil and abrasive paper, canShorten the preparation time
  • In view of the stainless steel and nickel base alloyoptimized
  • Durable grinding surfaceMaximize reproducibility

How much time you will be able to save?

MD - Alto adopt unique resin bonding structure of alumina, can replace 50 silicon carbide foil or abrasive paper, let you can continuous preparation of samples.Rigid MD with smooth surface can be prepared sample, and will not affect the quality of results.It is to be strong enough to without have torn down in addition to sample burr.On compact desktop grinding equipment using MD - Alto, can save your laboratory space, save material phase process and reduce waste of time.

Click here to view complete product data and test results

How to support your MD grinding surface material phase process?

The preparation of getting good results

If you're looking for high quality almost no defects preparation as a result, the MD surface will be special for you.MD surface without elastic rigidity, smooth specimen can be obtained, and can avoid round edges.It also can ensure the uniform material removal rate, no trailing in the soft phase, in the brittle phase no debris.

Search for your material on the surface of the optimized

When handling a specific material, why compromise solution in general?Each of our MD surface for special materials is optimized.You will be found in our series products suitable for your material of the surface of the MD.Every surface of adopting the combination of unique design, abrasive and adhesive can not only provide consistently high removal rate, and can minimize lead to deformation.So, you can reduce the subsequent steps it takes as much as 50% of the time.

Minimize error and improve the reproducibility

Eliminate random error and human error, support reliable standardization process.Directly available MD surface can reduce the complexity of the process, the removal rate of the consistent can again and again to ensure reproducible results.

To reduce the waste in the process of surface replacement

If you can make the operator, and the automation equipment, to finish the work?Durability of the surface of the MD than silicon carbide foil or abrasive paper can be used for a longer time, and there's no need to changed frequently, so can reduce the waste process, and to maximize efficiency.

The preparation of MD grinding can achieve excellent results
Implement and maintain smoothness, minimize defects
An overview of the 2 MD surface
Use for your material for optimization of the surface of the MD, shorten the preparation time
MD surface can reduce the process waste
Each alternative as many as 100 pieces of silicon carbide MD surface foil or abrasive paper

The main features

MD main features 1024 x759px MD the principle of grinding surface

The surface of the rigid

Rigidity of the surface of the MD not elastic and can ensure smooth specimens, and can avoid round corners, which can realize the preparation of excellent results

grinding

Optimized design

Each design can minimize grinding debris accumulation, to achieve consistent high removal rate and the distortion of as little as possible, to save time in the following preparation steps

Easy to use

Easy to use

MD surface directly available, almost don't need to prepare or finishing, except occasionally necessary modification, requires little maintenance

MD main features 1024 x759px removal rate

Consistently high removal rate

Mosaic abrasive to keep sharp for long, can provide consistently high removal rate, to ensure the high quality of the sample and improve the reproducibility

Main features 1024 x759px MD and SiCl MD

The service life is long

MD than silicon carbide surface foil and abrasive paper has a longer service life.Each alternative MD surface as many as 100 pieces of silicon carbide abrasive paper or foil

Main characteristics of 1024 x759px water-cooled MD

Water cooled

MD with Mosaic abrasive surface to use water for cooling, it is ideal to reduce the temperature of coolant

Flexible plate

Non-slip backing

The rough surface of the MD have non-slip backing, even if has a high friction in the process of grinding, also can ensure safely attached on a magnetic disk

Surface of MD series overview

Flexible plate

All of our MD surface with thin flexible steel plate as the base plate, thus positioning, remove and storage are very convenient.On the surface of the whole life process can keep the flatness

Non-slip backing

The surface of the unique technology

MD - Alto adopt unique resin bonding alumina surface, dedicated to the flexible material, can provide consistent removal rate

Search for your ideal MD grinding surface

Plane lapping

MD main features 1024 x759px MD Piano fritlagt

MD - Piano

, specifically designed for grinding hardness higher than 150 HV
Diamond pad replacement products, suitable for large ceramic or sintered carbide sample
Metal materials, especially for black
• not suitable for flexible material
, can choose a variety of models, can provide the equivalent of silicon carbide particle size of 80, 120 or 220 samples finish (FEPA P)
•Here to download the technical specifications

In the online mall to buy

Fine grinding

MD main features 1024 x759px MD Piano fritlagt

MD - Piano

• is suitable for the material hardness is higher than 150 HV
, especially for black metal materials, concrete and ceramics
• can provide equivalent silicon carbide particle size of sample finish (FEPA P), 2000-4000
, can provide a very short time and shorten the preparation time
•Here to download the technical specifications

In the online mall to buy

See the full details and technical specifications

A comprehensive understanding of all of our MD grinding surface (according to the materials and grinding step organization), and their complete details and technical specifications.

Select your surface

Do you need for your materials, tasks, or device customized advice?

Contact our specialists

You have to deal with hard material?

Our diamond pad provides a lot of the same benefits with our MD surface, suitable for ceramic, mineral processing, sintering and very hard black metal carbides.Them with the use of MD - Gekko joint plate is fully compatible with the MD system.

Diamond pad

  • Metal bonded diamond abrasive pad
  • Is suitable for the material hardness is higher than 600 HV
  • There are four kinds of particle size choices: 250 (including m, including 125 m, including 40 m and 20 (including m
  • Since the glue type, can be used in the MD - Gekko
Choose your diamond pad
Make sure that

Ensure certainty

High quality material can be reliably delivered when you need to, let your supply chain risk minimization and ensure the normal operation of the time.All materials can be in 48 hours from our located in the United States, Japan, China, Germany and Denmark's distribution center delivery.We lean production and strict internal quality control to obtain the ISO 9001 certification, can ensure that all material performance, and contribute to a safer place to work.

Contact us