Minitom
- Artifact maximum size of 30 x 40 mm
- High precision table cutting machine
- Can prevent the thermal deformation at low speed
- The accuracy of + 0.01 mm
- 75-125 - mm (3-5 ', ') CBN and diamond cutting wheel
A small, low speed, automation precision cutting machine, can not bear the precision of high-speed cutting of high temperature material workpiece in cutting.Using gravity feed design, can cut different materials, has a high accuracy and reproducibility.The design of the Minitom give full consideration to the speed and efficiency.Simple design, cutting set it only takes a few minutes, after completion of the cutting cutting machine can be set to automatically stop, let you can more time to deal with other tasks.
To achieve precision materials of high quality cutting
Use Minitom, can't bear the high temperature of high speed cutting produced can be small and precision of the material of the workpiece in cutting.Regardless of what kind of material, you deal with gravity feed design can let you to high reproducibility of cutting samples without deformation.
To achieve high accuracy and precision
Minitom allows you to use micrometer screw, the precision of the workpiece machined to + 0.01 mm, especially suitable for high precision, small artifacts.
Cut quickly, improve the capacity and efficiency
Minitom design simple, can achieve rapid cutting.Fixed workpiece and set the stop position, cutting stress and cutting wheel rotation speed, it only takes a few minutes can cut more artifacts in a shorter time, improve the overall efficiency.
Please check the other features in the brochure
To ensure for all types of samples in the lab for precision cutting of the main features
-
Removable sample clamp arm
The arm has two weight steelyard role.A balanced sample clamp and sample;Another is used to set the accurate cutting stress.The cutting process, the moving arm under the pressure from cutting weight function, lead to the cutting wheel.
Removable sample clamp arm
-
Even under high load can maintain a constant speed
Select the desired cutting wheel rotation speed, even in the case of high load, motor can ensure constant rotational speed.To achieve additional protection, prevent damage, can choose do not depend on the weight of the workpiece cutting pressure.
Even under high load can maintain a constant speed
-
Avoid thermal overload
If you need to stop cutting, overload will give visual alarm lights.In order to prevent the motor overload, thermal overload protection device will shut down the motor when temperature is too high.
Avoid thermal overload
-
Stop cutting set
Can adjust Minitom, make it at any stage, such as when the material to cut off the stop cutting, so I can let you have more time to deal with other tasks.Just to set tasks, and set Minitom run, and then return when the job is done.
Stop cutting set
-
Cutting wheel cooling box
To prevent the samples from the thermal deformation, the whole cutting process with surface protection.Cooling fluid is brought to the coolant tank.For ease of cleaning, coolant tank is easy to remove.
Cutting wheel cooling box
The facts
model
Minitom
Minitom is a low-speed precision cutting machine, can't bear the high temperature of high speed cutting produced can be small and precision of the material of the workpiece in cutting.It can process various materials, and is equipped with a general sample group fixture and flange (65 mm in diameter and 42 mm diameter).
Cutting wheel, cutting fluid, and additional sample clamp holder requires a separate order.
Minitom is a low-speed precision cutting machine, can't bear the high temperature of high speed cutting produced can be small and precision of the material of the workpiece in cutting.It can process various materials, and is equipped with a general sample group fixture and flange (65 mm in diameter and 42 mm diameter).
Cutting wheel, cutting fluid, and additional sample clamp holder requires a separate order.
Sample clamp arm |
|
| The balance weight | 200 g / 7 ounces |
| Cutting weight | 350 g / 12 ounces |
Cutting wheel |
|
| size | 75-125 - mm / 3-5" |
| The arbor size | 12.7 mm / 0.5" |
| speed | 100-420 RPM |
| Cutting ability | 30 x 40 mm / 1.2 x 1.6" |
| The motor power | 38 W |
| control | Touch screen and a knob |
| Circulating cooling liquid tank | 250 ml / 0.07 gallons |
| Noise level | LPA= 58 dB (A) |
| The surrounding temperature | 5 to 40 ° C / 31-13-1 ° F |
| humidity | Relative humidity is < 95%, no condensation |
The power supply |
|
| Voltage/frequency | 100-240 - V / 50 to 60 Hz |
| security | Comply with all relevant eu directives |
Size and weight |
|
| The width of the | 28 cm / 11" |
| The depth of the | 40 cm / 15.7" |
| highly | 40 cm / 15.7" |
| The weight of the | 8 kg / 17.6 LBS. |
Struers equipment comply with the provisions of the applicable international standards instruction and affiliate.
Struers products research and development to upgrade.Therefore, we reserve the right to improve product, without prior notice.
Ask for the Minitom technical data sheet
Minitom technical data sheet
Short and clear instructions, to provide you with instant profile, help you make the best equipment selection.
• capacity and performance indicators
Size and weight
• electrical data
The noise level,
• security
For Minitom brochure
For the complete introduction, descriptive diagram and main function introduction, help you sure equipment choice.
• explanatory diagrams
, the main function is introduced
• technical data sheet
Cutting consumables
-
Grinding cutting wheel
Very hard black metal (< 500 HV < 1400).
Enter the online mall Contact the sales -
Grinding cutting wheel
Very hard black metal (< 400 HV < 800).
Enter the online mall Contact the sales -
Grinding cutting wheel
Hard black metal (< 275 HV < 750).
Enter the online mall Contact the sales -
Grinding cutting wheel
Medium hardness of ferrous metals (< 200 HV < 550).
Enter the online mall Contact the sales -
Grinding cutting wheel
Medium softness black metal (< 100 HV < 500).
Enter the online mall Contact the sales -
Grinding cutting wheel
Soft black metal (< 75 HV < 375).
Enter the online mall Contact the sales -
Diamond cutting wheel
Suitable for HV hardness material of 500-2400.
Enter the online mall Contact the sales -
CBN cutting wheel
Suitable for HV hardness material of 500-2400.
Enter the online mall Contact the sales -
Used to cut the additives
Used for circulation, cooling and cleaning.
Enter the online mall Contact the sales -
+
-
-
The correct preparation plan
"More precise structure also need proper application correctly.Different material characteristics need extensive application knowledge.Struers expert is an expert in the optimization of preparation methods, application because the application of knowledge is essential for choosing the correct preparation of solution.Your material - our application solutions."
Birgitte Nielsen
Application specialist, Struers ApS
Meeting with the customer
Don't just listen to us!From using our customer experience in equipment and skills to seek the truth.We asked some loyal customers, to understand their thought of Struers is the most important quality.
As the pillar of the quality assurance plan, Struers laboratory promoted the product easy to use, makes the production increase, efficient use of the human resources, and save a lot of time.Struers equipment to check the fasteners, in my opinion, the quality of the product provides the most effective and consistent way.The Ideal Fasteners Pty Ltd (Australia)Neville sellManaging director,
We have been able to get repetitive, consistency, high quality results.Struers consistency and reliability of the cutting machine for our factory in Indonesia install similar Struers system has a decisive role.Grinding Media, Moly - Cop (Australia)Glenn Sullivan,The technical development manager
We are delighted with Struers provide efficient services.They always can quickly and efficiently meet our requirements.BRP mahle Powertrain GmbH &co. KG (Austria)Herr Thomas BrunmairMaterials, director of the laboratory